Home > Nickel Alloy> Nickel Alloy Sheets and Plates
Nickel alloy Sheets and Plates are level, slender sheets of substance produced from nickel-based alloys. These alloys generally hold a large amount of nickel, together with additional elements like chromium, molybdenum, cobalt, and iron, among others, to boost particular characteristics such as resistance to corrosion, strength at high temperatures, and durability.
| Nickel Alloy Sheets & Plates Specifications | ASTM B162 / ASME SB162, BS EN 10088-2, en 10028-7, IS 6911 |
|---|---|
| Nickel Alloy Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Nickel Alloy Sheets & Plates Size Range | Cold rolled ASME SB162 Grade 201 Nickel Alloy Sheet 0.5-6.4 mm Hot rolled ASME SB162 Grade 200 Nickel Alloy Sheet 3.0–10.0 mm |
| Nickel Alloy Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Nickel Alloy Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Nickel Alloy Sheets & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Nickel Alloy Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) of Nickel Alloy Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SB162 200 Nickel Alloy Strips EN 10088 SA -240-400 Strips |
| Finish of Nickel Alloy Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Nickel Alloy Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
| Element | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
|---|---|---|---|---|---|---|---|---|---|
| Nickel | 99.99 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
At Santossteel, we take pride in being the largest supplier and manufacturer in the Brazil, delivering advanced solutions for all your piping requirements. With cutting-edge production facilities strategically situated in the Brazil, we maintain an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Contact us to receive a fast quote for your requirement.
We supply these Nickel Alloy Sheets and Plates conforming to DIN, ISO, JIS or ANSI Standard.
Corrosion Resistance: Nickel alloys offer outstanding corrosion resistance, which makes them well suited for demanding settings like chemical processing facilities, marine uses, and offshore oil and gas platforms.
High Temperature Strength: Nickel alloys retain their mechanical characteristics even at high temperatures, making them perfect for use in heat-intensive settings such as gas turbines, power generation, and aerospace.
Excellent Mechanical Properties: Nickel alloy Sheets and Plates display superb mechanical qualities, such as high tensile strength, toughness, and ductility, delivering dependable performance in challenging applications.
Versatility: Nickel alloys can be customized to satisfy particular application needs by modifying the makeup of alloying elements, enabling a broad spectrum of properties and performance traits.
Resistance to Creep and Fatigue: Nickel alloys show resistance to creep and fatigue, enabling them to preserve their structural soundness and dimensional stability throughout extended periods of use.
Weldability and Fabricability: Nickel alloy Sheets and Plates are typically weldable and formable, permitting easy fabrication and assembly into intricate shapes and structures.
Compatibility: Nickel alloys work well with a broad array of other materials, including metals, polymers, and ceramics, easing their integration into multi-material systems and assemblies.
Longevity: Nickel alloy Sheets and Plates provide long-term durability and reliability, leading to prolonged service life and lower maintenance demands for industrial equipment and components.
Nickel alloy Sheets and Plates are extensively utilized throughout industry in numerous sectors owing to their remarkable characteristics. Within aerospace, these sheets are employed in parts exposed to elevated temperatures and corrosive settings, such as turbine blades and engine components. Chemical processing depends on their resistance to corrosion for vessels, piping, and reactors that handle corrosive materials. In the oil and gas industry, they play a key role in offshore platforms, pipelines, and equipment thanks to their toughness against severe environmental conditions
Aerospace: Nickel alloy Sheets and Plates serve aerospace purposes in the production of aircraft parts like turbine blades, engine components, structural members, and exhaust systems, owing to their strength at elevated temperatures, resistance to corrosion, and low weight.
Chemical Processing: These Sheets and Plates are put to use in chemical processing industries to build vessels, reactors, heat exchangers, and piping systems that manage corrosive chemicals and elevated temperatures, situations in which their corrosion resistance is vital.
Oil and Gas: Within the oil and gas sector, nickel alloy Sheets and Plates are applied to offshore platforms, pipelines, valves, and equipment subjected to corrosive settings, high pressures, and extreme temperatures, guaranteeing dependability and durability under severe conditions.
Power Generation: Nickel alloy Sheets and Plates are applied in power generation plants for turbines, boilers, heat exchangers, and other parts exposed to high temperatures, pressures, and corrosive gases, guaranteeing efficiency and dependability throughout power generation processes.
Marine Engineering: These Sheets and Plates are applied in marine engineering for shipbuilding, seawater desalination plants, offshore platforms, and marine structures, contexts where their resistance to corrosion from seawater and severe marine settings is indispensable.
Medical Equipment: Nickel alloy Sheets and Plates are employed in medical equipment production for parts that demand biocompatibility, corrosion resistance, and the ability to be sterilized, such as surgical instruments, prosthetic devices, and implants.
Electronics: In electronics production, nickel alloy Sheets and Plates are put to use for battery components, connectors, and electronic packaging thanks to their electrical conductivity, thermal stability, and corrosion resistance.
Automotive Industry: Nickel alloy Sheets and Plates are applied in the automotive industry to produce exhaust systems, catalytic converters, fuel cells, and other parts that call for strength at high temperatures, corrosion resistance, and durability.
Nuclear Industry: These Sheets and Plates are applied in the nuclear industry to build reactor components, fuel rods, and containment vessels because of their resistance to radiation, high temperatures, and corrosive settings.
Food Processing: Nickel alloy Sheets and Plates are put to use in food processing equipment for their corrosion resistance and hygienic qualities, safeguarding the integrity and safety of food processing operations.
Identify Application Requirements: Identify the working conditions—covering temperature, pressure, corrosion, and mechanical stress levels—so you can choose Sheets and Plates capable of enduring these conditions.
Alloy Composition: Nickel alloys are available in a range of compositions, with each providing particular properties. Pick an alloy composition according to the traits you want, such as corrosion resistance, high temperature strength, or magnetic properties.
Thickness and Size: Pick Sheets and Plates with the right thickness and size to fit your application needs, taking into account aspects like load-bearing capacity, dimensional tolerances, and available space.
Surface Finish: Think about the surface finish your application calls for, such as smooth, polished, or textured surfaces. The surface finish can influence factors like corrosion resistance, aesthetics, and ease of cleaning.
Certifications and Standards: Make sure the Sheets and Plates comply with applicable industry standards and certifications, such as ASTM, ASME, or AMS specifications, to ensure quality, performance, and compatibility with other components.
Corrosion Resistance: Assess how well the nickel alloy resists corrosion against the particular corrosive agents found in your application, such as acids, alkalis, seawater, or chemical vapors, to avoid corrosion-related failures.
Temperature Resistance: Confirm the temperature resistance of the nickel alloy Sheets and Plates to make certain they can endure the maximum operating temperature without degradation or loss of mechanical properties.
Mechanical Properties: Take into account the mechanical properties of the nickel alloy, such as tensile strength, yield strength, and ductility, to make sure they satisfy the mechanical requirements of your application.
Fabrication and Weldability: Examine the fabricability and weldability of the nickel alloy Sheets and Plates to ensure they can be readily formed, machined, and welded into the desired shapes and structures without compromising performance.
Cost Considerations: Assess the cost of the nickel alloy Sheets and Plates, including material cost, fabrication, and installation costs, to gauge the overall value and cost-effectiveness of the solution.
Yes, nickel alloy Sheets and Plates can be well-suited to hygienic and sanitary applications thanks to their corrosion resistance, smooth surface finish that makes cleaning easy, non-toxicity, resistance to bacterial growth, high temperature resistance for sterilization, long-term durability, and compliance with industry standards.
Nickel alloy sheets/plates can be shaped and machined through standard techniques including cutting, bending, forming, welding, and machining. For machining tasks, carbide tooling is advised, and appropriate measures should be taken to prevent work hardening and tool wear.
Nickel alloy sheets and plates are commonly available in grades such as Inconel, Monel, Hastelloy, Alloy 20, Nickel 200, Nickel 201, and more, with each grade delivering particular properties and performance traits suited to varying applications.
To ensure quality and dependability, it’s important to obtain nickel alloy sheets/plates from trustworthy manufacturers who follow rigorous quality control standards, certifications, and industry specifications. Material tests, inspections, and conformance with standards should be confirmed prior to use.
| Thickness | Width | Length | Surface Finish |
|---|---|---|---|
| 15~85 mm | 914, 1219, 1524 mm | 3048, 6069 mm 10 M | Black |
| 3~8 mm | 20~1524 mm | Container Loading: Max. 10M Bulk: as request | No.1 |
| 8 up ~ 60 mm | 30~1524 mm | Max. 6096 mm | No.1 |
Email: sales@santossteel.com