Monel K500 bolts are fasteners manufactured from Monel K500, a nickel-copper alloy strengthened through precipitation hardening and recognized for its outstanding corrosion resistance combined with high strength. These bolts are commonly employed in situations where withstanding corrosive settings, like seawater or chemical processing, is critical. Monel K500 bolts deliver better mechanical characteristics than ordinary Monel alloys, which makes them well-suited for challenging conditions including marine equipment, offshore structures, aerospace components, and chemical processing plants. They come in a range of sizes, thread types, and configurations to meet varying application needs.
| Specifications | ASTM F 467 ASME SF 467 |
|---|---|
| Standard | IS, ASTM, BS and all International Standards |
| Length | 3 mm to 200 mm |
| Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Screw Type | Monel K500 Threaded Screw, Hex Head Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw etc. |
| Bolts Types | Monel K500 Hex Head Bolts, Hex Bolts, Square Bolts, Eye Bolts, T Bolts, U Bolts, Lag Bolts, Counter sunk Bolts etc. |
| Washer Types | Monel K500 Lock Washer, Machine Washers, Star Washers, Sealing Washer, Split Washer etc. |
| Studs Types | Monel K500 Double Ended Studs, Threaded Tod, Tie Bars, Tie Rodsetc. |
| Nut Types | Monel K500 Coupling Nut, Hex Head Nut, Wing Nut, Square Nut, Panel Nut, T Nut, Acorn Nuts, Dome Nut, Eye Nut, Lock Nut etc. |
| Properties | Metric | Imperial |
| Tensile strength(annealed) | 517-620 MPa | 75-90 ksi |
| Yield strength | 172-345 MPa | 25-50 ksi |
| Modulus of elasticity | 179 GPa | 26000 ksi |
| Poisson’s ratio | 0.32 | 0.32 |
| Element | Content (%) |
| Nickel, Ni | 63.0-70.0 |
| Silicon, Si | .50 max |
| Carbon, C | .25 max |
| Sulphur, S | .01 max |
| Copper, Cu | – |
| Iron, Fe | 2.0 max |
| Manganese, Mn | 1.5 max |
At Santossteel, we take pride in being the largest supplier and manufacturer in the Brazil, delivering advanced solutions for all your piping requirements. With cutting-edge production facilities strategically positioned in the Brazil, we hold an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Reach out to us for a fast quote tailored to your requirement.
We provide these Monel K500 Bolts in compliance with DIN, ISO, JIS or ANSI Standard.
Monel K500 Bolts have uses as varied as the sectors they support, led mainly by the aerospace, railway, construction and automotive sectors along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Yes Monel K500 bolts can be recycled. Monel, a nickel-copper alloy, is recognized for being recyclable and sustainable. Through recycling, the materials in Monel K500 bolts can be recovered and reused without degrading their mechanical properties. This ability to be recycled supports environmental stewardship by lowering the need for new raw materials and cutting down on waste across a range of industrial applications.
Yes Monel K500 bolts are suitable for specific structural applications that demand corrosion resistance, high strength, and durability. Although they are not used as frequently as steel bolts in structural work, Monel K500 bolts work well in settings where corrosion from seawater, chemicals, or other severe conditions poses a risk. That said, the particular structural needs and regulations of any given application must be evaluated with care, and consulting structural engineers is advised to confirm compliance with safety standards and structural integrity.
Monel K500 bolts are typically not advised for cryogenic uses because of their vulnerability to embrittlement at very low temperatures. Although Monel alloys demonstrate solid mechanical properties at both room and high temperatures, they can turn brittle and lose their ductility when exposed to cryogenic conditions. For cryogenic uses, materials such as stainless steel or specific nickel-based alloys offering superior cryogenic performance are generally favored to guarantee dependable performance and safety.
Monel K500 bolts possess natural corrosion resistance owing to their nickel-copper alloy makeup, which means supplementary corrosion protection coatings are typically not required. Nevertheless, in extremely corrosive settings like marine or chemical processing uses, adding coatings such as nickel or chrome plating can improve their resistance and extend their service life. Whether corrosion protection coatings are needed relies on the particular application and the degree of exposure to corrosive elements.