Inconel 718 flanges are flange fittings produced from Inconel 718, a nickel-based super alloy recognized for its outstanding strength, resistance to high temperatures, and resistance to corrosion. These flanges serve to join pipes, valves, and other equipment within piping systems, delivering safe and leak-free connections in challenging environments.
| Specifications | : | ASTM B564 / ASME SB564 |
| Size | : | 1/2″NB TO 60″NB |
| Standards | : | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti | Nb |
| 718 | 0.08 | 0.35 | 0.35 | 0.01 | 0.3 | bal | 50.0 – 55.0 | 17.00 – 21.00 | 0.2 – 0.8 | 0.7 – 1.15 | 4.75 – 5.5 |
| Grade | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 70,000 , MPa – 482 | Psi – 1,35,000 , MPa -930 | 45 % |
At Santossteel, we take pride in being the largest supplier and manufacturer in the Brazil, delivering advanced solutions for all your piping requirements. With cutting-edge production facilities strategically situated in the Brazil, we maintain an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Reach out to us for a fast quote tailored to your requirement.
We supply these Inconel 718 Flanges in accordance with DIN, ISO, JIS or ANSI Standard.
High Temperature Resistance: Inconel 718 flanges can endure extreme temperatures reaching 1300°F (704°C) without any loss of their mechanical properties, which makes them well-suited for high-temperature uses such as aerospace and gas turbines.
Corrosion Resistance: Inconel 718 flanges show outstanding resistance to corrosion and oxidation in severe conditions, such as acidic and corrosive chemicals, seawater, and high-pressure steam, boosting their durability and longevity.
High Strength: Inconel 718 flanges deliver high tensile and yield strength, enabling them to bear heavy loads, high pressures, and mechanical stresses in demanding industrial settings.
Fatigue Resistance: Inconel 718 flanges possess good fatigue resistance, making them appropriate for cyclic loading situations and extending their service life in dynamic uses such as aerospace and automotive components.
Weldability: Inconel 718 flanges are readily weldable with conventional welding techniques, allowing straightforward fabrication and assembly of complex structures and piping systems without sacrificing performance or integrity.
Creep Resistance: Inconel 718 flanges provide excellent creep resistance at high temperatures, preserving dimensional stability and mechanical properties over extended periods, which is essential for high-temperature uses like gas turbines and nuclear reactors.
Versatility: Inconel 718 flanges are versatile and can serve a range of industries, including aerospace, oil and gas, chemical processing, automotive, and power generation, delivering dependable performance across diverse applications.
Low Thermal Expansion: Inconel 718 flanges feature a low coefficient of thermal expansion, lowering the risk of dimensional changes and distortion at high temperatures, ensuring dimensional stability and tight tolerances in critical applications.
Inconel 718 Flanges are widely utilized across industries that demand exceptional performance in extreme conditions. Their outstanding resistance to elevated temperatures, corrosion, and mechanical stress renders them essential in aerospace, chemical processing, oil and gas, and power generation applications. Whether in piping systems or pressure vessels, Inconel flanges deliver dependable performance in demanding environments where conventional materials prove inadequate. Their superior durability and toughness are vital for preserving operational integrity and safety throughout diverse industrial settings.
Aerospace: Inconel 718 flanges are widely applied in aircraft engines, gas turbine parts, and rocket propulsion systems owing to their resistance to high temperatures and corrosion.
Gas Turbines: Inconel 718 flanges serve gas turbine engines in parts like combustion chambers, turbine blades, and seals, where they endure elevated temperatures and corrosive conditions.
Chemical Processing: Inconel 718 flanges are used in chemical processing plants to handle corrosive chemicals, acids, and high-temperature fluids, delivering dependable and leak-free connections within piping systems.
Oil and Gas: Inconel 718 flanges are applied in the oil and gas sector for offshore drilling rigs, subsea equipment, and downhole components, where they provide resistance to corrosion, hydrogen sulfide, and high pressures.
Nuclear Reactors: Inconel 718 flanges are used in nuclear power plants for reactor pressure vessel parts, steam generators, and control rod drive mechanisms, delivering durability and reliability within nuclear settings.
Automotive: Inconel 718 flanges serve high-performance automotive engines in exhaust systems, turbocharger parts, and fuel injection systems, where they endure extreme temperatures and pressures.
Petrochemical: Inconel 718 flanges are used in petrochemical plants for processing equipment, heat exchangers, and reactor vessels, providing resistance to harsh chemical conditions and elevated temperatures.
Aerospace Propulsion: Inconel 718 flanges are vital in aerospace propulsion systems for parts like thrust reversers, afterburners, and nozzle assemblies, where they withstand extreme temperatures and stresses.
Power Generation: Inconel 718 flanges are used in power generation facilities for gas turbine exhaust systems, boiler feedwater heaters, and steam turbine parts, delivering reliability and longevity in high-temperature settings.
Marine Engineering: Inconel 718 flanges are applied in marine engineering for ship propulsion systems, seawater desalination plants, and offshore platforms, where they provide corrosion resistance in saltwater conditions along with high mechanical strength.
Identify Application Requirements: Establish the operating conditions, such as temperature, pressure, corrosion, and mechanical stress levels, in order to choose flanges capable of enduring these conditions.
Material Compatibility: Confirm that the Inconel 718 material works well with the fluids, gases, or chemicals involved in your application to avoid corrosion or chemical reactions.
Flange Type: Pick the suitable flange type according to the connection method your piping system needs, such as weld neck, slip-on, socket weld, or threaded flanges.
Size and Dimensions: Opt for flanges with the proper size and dimensions to align with the pipe diameter, thickness, and pressure rating of your piping system, guaranteeing a correct fit and seal.
Pressure Rating: Take into account the pressure rating of the flanges to confirm they can endure the maximum pressure anticipated in your application without failure or leakage.
Temperature Rating: Check the temperature rating of the flanges to confirm they can manage the maximum operating temperature without degradation or loss of mechanical properties.
Standards and Specifications: Select flanges that meet relevant industry standards and specifications, such as ASME, ASTM, ANSI, or DIN, to guarantee quality, performance, and compatibility with other components.
Quality and Certification: Pick flanges from reputable manufacturers known for producing high-quality products and holding certifications, such as ISO 9001, to guarantee reliability and consistency.
Testing and Inspection: Confirm that the flanges go through stringent testing and inspection procedures, such as hydrostatic testing, non-destructive testing (NDT), and material certifications, to ensure they satisfy required standards and specifications.
Cost Considerations: Assess the cost of the flanges, including purchase price, installation, maintenance, and lifecycle costs, to gauge the overall value and cost-effectiveness of the solution.
Yes, Inconel 718 flanges are appropriate for welding. Inconel 718 is a nickel-based superalloy recognized for its outstanding weldability properties. It can be joined using a range of welding methods, such as gas tungsten arc welding (GTAW or TIG), gas metal arc welding (GMAW or MIG), shielded metal arc welding (SMAW or stick), and plasma arc welding (PAW), among others.
|
Pipe Normal Diam. |
O.D. Flange |
Thk. Of Flange Min |
Diam.
of
Hub |
Diameter of Raised Face |
Length Hub.Y |
Thread Length |
Diam.
of Bolt
Circle |
Diam.
of Bolt
Holes |
Number
of Bolts |
Diam. of
Bolts
(inch) |
KG |
LB |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
inch |
dn |
O |
C |
X |
G |
Y |
T |
BC |
BH |
BN |
BD |
||
|
1/2″ |
15 |
89.00 |
11.20 |
30.20 |
35.10 |
15.70 |
15.70 |
60.50 |
15.80 |
4 |
1/2″ |
0.4 |
0.9 |
|
3/4″ |
20 |
98.50 |
12.70 |
38.10 |
42.90 |
15.70 |
15.70 |
69.90 |
15.80 |
4 |
1/2″ |
0.7 |
1.5 |
|
1″ |
25 |
108.00 |
14.20 |
49.30 |
50.80 |
17.50 |
17.50 |
79.30 |
15.80 |
4 |
1/2″ |
0.8 |
1.8 |
|
1-1/4″ |
32 |
117.50 |
15.70 |
58.70 |
63.50 |
20.60 |
20.60 |
88.90 |
15.80 |
4 |
1/2″ |
1.2 |
2.6 |
|
1-1/2″ |
40 |
127.00 |
17.50 |
65.00 |
73.20 |
22.40 |
22.40 |
98.60 |
15.80 |
4 |
1/2″ |
1.5 |
3.3 |
|
2″ |
50 |
152.50 |
19.10 |
77.70 |
91.90 |
25.40 |
25.40 |
120.70 |
19.10 |
4 |
5/8″ |
2.3 |
5.1 |
|
2-1/2″ |
65 |
178.00 |
22.40 |
90.40 |
104.60 |
28.40 |
28.40 |
139.70 |
19.10 |
4 |
5/8″ |
3.7 |
8.1 |
|
3″ |
80 |
190.50 |
23.90 |
108.00 |
127.00 |
30.20 |
30.20 |
152.40 |
19.10 |
4 |
5/8″ |
4.1 |
9 |
|
3-1/2″ |
90 |
216.00 |
23.90 |
122.20 |
139.70 |
31.80 |
31.80 |
177.80 |
19.10 |
8 |
5/8″ |
5.1 |
11.2 |
|
4″ |
100 |
228.50 |
23.90 |
134.90 |
157.20 |
33.30 |
33.30 |
190.50 |
19.10 |
8 |
5/8″ |
5.9 |
13 |
|
5″ |
125 |
254.00 |
23.90 |
163.60 |
185.70 |
36.60 |
36.60 |
215.90 |
22.40 |
8 |
3/4″ |
7 |
15.4 |
|
6″ |
150 |
279.50 |
25.40 |
192.00 |
215.90 |
39.60 |
39.60 |
241.30 |
22.40 |
8 |
3/4″ |
8.4 |
18.5 |
|
8″ |
200 |
343.00 |
28.40 |
246.10 |
269.70 |
44.50 |
44.50 |
298.50 |
22.40 |
8 |
3/4″ |
13 |
28.6 |
|
10″ |
250 |
406.50 |
30.20 |
304.80 |
323.90 |
49.30 |
49.30 |
362.00 |
25.40 |
12 |
7/8″ |
18 |
39.5 |
|
12″ |
300 |
482.50 |
31.80 |
365.30 |
381.00 |
55.60 |
55.60 |
431.80 |
25.40 |
12 |
7/8″ |
29 |
64 |
|
14″ |
350 |
533.50 |
35.10 |
400.10 |
412.80 |
57.20 |
57.20 |
476.30 |
28.50 |
12 |
1″ |
39 |
86 |
|
16″ |
400 |
597.00 |
36.60 |
457.20 |
469.90 |
63.50 |
63.50 |
539.80 |
28.50 |
16 |
1″ |
47 |
103 |
|
18″ |
450 |
635.00 |
39.60 |
505.00 |
533.40 |
68.30 |
68.30 |
577.90 |
31.80 |
16 |
1 1/8″ |
57 |
126 |
|
20″ |
500 |
698.50 |
42.90 |
558.80 |
584.20 |
73.20 |
73.20 |
635.00 |
31.80 |
20 |
1 1/8″ |
76 |
167 |
|
24″ |
600 |
813.00 |
47.80 |
663.40 |
692.20 |
82.60 |
82.60 |
749.30 |
35.10 |
20 |
1 1/4″ |
97 |
214 |
Yes, Inconel 718 flanges can endure temperatures reaching roughly 1300°F (704°C), which makes them well-suited for use in high-temperature settings.
Inconel 718 flanges deliver high strength, superb corrosion resistance, and outstanding performance at high temperatures, which makes them well-suited for demanding industrial applications.
Yes, Inconel 718 flanges is compatible with a broad variety of materials frequently found in piping systems, such as stainless steel, carbon steel, and other nickel-based alloys.
Email: sales@santossteel.com